MULEHIDE
Liquid Coatings
Solutions for Every Low-Slope Roof Challenge
There is more to roofing than total replacement. When considering lifecycle costs, it can make sense to prolong the life of the roof with coatings and qualify for a fresh NDL warranty on an existing roof.
![Wertz and Company Images](/imageserver/Reusable/mulehide/silicone-thumb-min.jpg)
silicone
Mule Hide silicone Roof Coating is a 100% silicone based, single part roof coating that creates a barrier that is durable, resistant to weathering, breathable, watertight and weatherproof.
![Wertz and Company Images](/imageserver/Reusable/mulehide/acrylic-thumb-min.jpg)
acrylic
Acrylic Roof Coating is an elastomeric water base roof coating system or maintenance coating over metal and on smooth asphalt built-up roofs, Mod Bit, EPDM, TPO and PVC.
![Wertz and Company Images](/imageserver/Reusable/mulehide/sebs-thumb-min.jpg)
sebs
SEBS Roof Coating is an elastomeric solvent-based coating for the repair and restoration of metal roofs. Based on tough, elastic Styrene Ethylene/Butylene Styrene polymers and a clear adhesive hydrocarbon resin in an aromatic hydrocarbon vehicle.
![Wertz and Company Images](/imageserver/Reusable/mulehide/asphalt-thumb-min.jpg)
asphalt
A general purpose formulation for use as a cold-applied sealing and repair material in many types of asphalt roof membranes.
Benefits of Applying MuleHide Coatings
Reflective roof coatings extend the service life of a mature roofing system. Lasting restoration or repair delays capital expense until an expensive tear off or overlay is necessary.
-
Trusted performance with quick application and cleanup using brush, roller or airless sprayer
-
Proven, time-tested formulations
-
Minimal disruption to the building
-
Maximize installed cost value
-
Energy Savingsmeets CRRC cool roof requirements by reflecting solar energy and reducing interior building temperatures
Anatomy Of Coatings
Roof coating systems are applied in layers to build desired dry mil thickness:
![Wertz and Company Images](/imageserver/Reusable/mulehide/coating-min.png)
-
All installations require proper cleaning prior to application
-
Depending on substrate, primer may be required
-
Penetrations are individually addressed before Base application
-
Tinted Base eliminates guesswork when applying Finish
-
With annual maintenance, a properly installed coating system may perform up to 20 years
Application Methods
![Wertz and Company Images](/imageserver/Reusable/mulehide/sprayer.png)
![Wertz and Company Images](/imageserver/Reusable/mulehide/roller.png)
![Wertz and Company Images](/imageserver/Reusable/mulehide/brush.png)